>> The sizes shown are average design values for tyres measured on specified measuring rim widths. Some tyres may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.
>> Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.
>> Tread patterns are often tuned to accommodate different tyre widths. tyres for a particular dimension of a given tyreline may vary in appearance from the tyre shown in the photograph.
WARNING: Serious or fatal injury may result from tyre failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tyre information placard on the vehicle. Serious injury or death may result from explosion of tyre/rim assembly due to improper mounting. Only tyre professionals should mount tyres and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tyres in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations. No tyre is indestructible. An impact can cause a tyre to fail, resulting in serious injury or death.
When replacing an Original Equipment P-Metric or Euro Metric size tyre with an LT-metric or High Flotation size tyre, the air pressures of the LT-metric / High Flotation tyre must be adjusted in order to properly carry the load of the vehicle. See your BFGoodrich tyres dealer for the proper air pressure recommendation.